Select the printer type in this instance choose the Add a network, wireless or Bluetooth printer option. On the horizontal bar select Add a Printer Next the Printer needs to be added to your list of Devices and Printers.įrom the Start Menu on your Windows machine select Devices and Printers After a few moments it will print out a list of settings including at the bottom of the self print the IP address as shown here. While holding down the feed button switch the printer on. Connect the printer to your router by Ethernet cable The printer will be in ESC/POS mode as soon as you switch it back on.įor further information you can download the manual for your printer by clicking on the following linkĪnd specifying your operating system and interface type (USB, Bluetooth or LAN). In the set of eight switches change the first switch to OFF using a small pointed tool such as a pen or flat-bladed screw driver.Make sure the printer is switched off then remove the plate by unscrewing it from the printer as seen below.Two sets of DIP switches are provided at the bottom of the Printer behind a small plate.If not, some applications may use Star Line Mode parsing, resulting in corrupted printing, the cutter not working and the cash drawer not kicking. It is necessary to enable this setting to ensure printouts are parsed accurately. The printer needs to be set to ESC/POS Emulation. The factory default mode of the Star TSP650 Series Printers is Star Line Mode. How to Setup Star TSP650 LAN Printers on Windows for AirPOSĪt present you will have to go through the following process first.

Star tsp650 windows 10 driver